Related Products and Services - DualHead2Go - Configuration

Top  Previous  Next

There are certain settings you'll need to make to use SongShow Plus with a DualHead2Go.

 

1.In the SongShow Plus Presenter Window, select the Tools > Display Settings menu item. This will open the Display Settings window.
2.Set Number of Displays to 2.
3.Click the Display Window 1 tab. This will show the controls for Display Window 1.
4.Ensure that Placement is set to Display Device.
5.Select the Display Device used by the DualHead2Go. This will look like an extra wide display in the layout area at the top of the settings window.
6.For Placement Area, select Half, Left. This will place the display window left half of the extra-wide display which maps to one of the physical devices.
7.Click the Display Window 2 tab. This will show the controls for Display Window 2.
8.Ensure that Placement is set to Display Device.
9.Select the same device that you selected in step 5.
10.For Placement Area, select Half, Right. This will place the display window right half of the extra-wide display which maps to the other physical device.
11.Click OK to save the settings.
12.Restart SongShow Plus for the changes to take effect.

 

If you intend to use Display Window 2 as a stage display, please read the further instructions for enabling the Stage Display.

If you intend to use Display Window 2 as a secondary display, please read further information on how to use multiple displays.